- L298N Dual H Bridge Motor Driver
About
Description
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the logic part.
Characteristics
- Info
Supply voltage for motors from 5 V to 46 V.
- Info
Power supply of the logic part after the stabilizer - active after removing the 5V jumper.
- Info
Module with popular L298N controller, which allows to control direction and speed of two DC motors. Thanks to ARK screw connectors, power supply and motors themselves can be easily connected by screwing wires with a screwdriver. Control signals are connected to popular goldpin connectors, allowing to connect the circuit to run boards, such as Arduino, using wires.
Similar Items You Might Like
Based on what customers bought
- SalePROJECTBASEGH
Micro Servo Motor SG90 9g
GH₵ 35.00
- SalePROJECTBASEGH
2WD Aluminum Smart Robot Car Chassis Kit DIY
GH₵ 300.00
- SalePROJECTBASEGH
LASK KIT LF-2 v1.0
GH₵ 50.00
- SalePROJECTBASEGH
Generic M4 x 17mm Female-Female Thread 4pcs
GH₵ 20.00
- SalePROJECTBASEGH
L298N Dual H Bridge Motor Driver
GH₵ 40.00
- SalePROJECTBASEGH
Universal Swivel Casters Wheel for Chassis
GH₵ 20.00
- SalePROJECTBASEGH
Rubber Wheel Smart Robot Car
GH₵ 15.00
- SalePROJECTBASEGH
4S 2A Lithium Battery Charger Module
GH₵ 55.00
- SalePROJECTBASEGH
TCRT5000 Infrared Sensor Module - Line Track
GH₵ 15.00
- SalePROJECTBASEGH
Mini-360 DC-DC 4.7V-23V to 1V-17V Buck Converter Step Down Module
GH₵ 20.00
- SalePROJECTBASEGH
Mini Water Pump 5V DC
GH₵ 30.00
- SalePROJECTBASEGH
L293D Motor Driver Shield
GH₵ 40.00
- SalePROJECTBASEGH
LM2596 Step-Down Adjustable DC-DC Switching Buck Converter
GH₵ 18.00
- SalePROJECTBASEGH
4.8 V 700MAH NICD RECHARGEABLE AA BATTERY
GH₵ 60.00
- SalePROJECTBASEGH
L298N Motor Driver Module
GH₵ 35.00
- SalePROJECTBASEGH
PCA9685 - 16-Channel 12-bit PWM -Servo Driver - I2C Interface
GH₵ 70.00
L298N Dual H Bridge Motor Driver
GH₵40 GH₵40
Tax included.
Quantity:
2 in stock now
Available now in limited quantities.
Next Day Delivery
Lightning-fast delivery, guaranteed.
Free 90-day returns
Shop risk-free with easy returns.
About
Description
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the logic part.
Characteristics
- Info
Supply voltage for motors from 5 V to 46 V.
- Info
Power supply of the logic part after the stabilizer - active after removing the 5V jumper.
- Info
Module with popular L298N controller, which allows to control direction and speed of two DC motors. Thanks to ARK screw connectors, power supply and motors themselves can be easily connected by screwing wires with a screwdriver. Control signals are connected to popular goldpin connectors, allowing to connect the circuit to run boards, such as Arduino, using wires.