- L293D Motor Driver Shield
About
Description
Motor Driver Shield is a board which gives possibility to control 4 DC motors or 2 step motors (unipolar or bipolar) and 2 servo motors additionaly by stacking on Arduino. There are 2 L293D motor driver IC on board which means it can drive 0.6A 4 seperate DC motors or 0.6A 2 seperate step motors. You can control speed and direction of motors independently. Motor controls are done by AF Motor Library.
Characteristics
- Info
5-12V operating voltage
- Info
Independent control of 4 DC motor
- Info
0,6A constant current on each channel
Similar Items You Might Like
Based on what customers bought
- SalePROJECTBASEGH
Micro Servo Motor SG90 9g
GH₵ 35.00
- SalePROJECTBASEGH
2WD Aluminum Smart Robot Car Chassis Kit DIY
GH₵ 300.00
- SalePROJECTBASEGH
LASK KIT LF-2 v1.0
GH₵ 50.00
- SalePROJECTBASEGH
Generic M4 x 17mm Female-Female Thread 4pcs
GH₵ 20.00
- SalePROJECTBASEGH
L298N Dual H Bridge Motor Driver
GH₵ 40.00
- SalePROJECTBASEGH
Universal Swivel Casters Wheel for Chassis
GH₵ 20.00
- SalePROJECTBASEGH
Rubber Wheel Smart Robot Car
GH₵ 15.00
- SalePROJECTBASEGH
4S 2A Lithium Battery Charger Module
GH₵ 55.00
- SalePROJECTBASEGH
TCRT5000 Infrared Sensor Module - Line Track
GH₵ 15.00
- SalePROJECTBASEGH
Mini-360 DC-DC 4.7V-23V to 1V-17V Buck Converter Step Down Module
GH₵ 20.00
- SalePROJECTBASEGH
Mini Water Pump 5V DC
GH₵ 30.00
- SalePROJECTBASEGH
L293D Motor Driver Shield
GH₵ 40.00
- SalePROJECTBASEGH
LM2596 Step-Down Adjustable DC-DC Switching Buck Converter
GH₵ 18.00
- SalePROJECTBASEGH
4.8 V 700MAH NICD RECHARGEABLE AA BATTERY
GH₵ 60.00
- SalePROJECTBASEGH
L298N Motor Driver Module
GH₵ 35.00
- SalePROJECTBASEGH
PCA9685 - 16-Channel 12-bit PWM -Servo Driver - I2C Interface
GH₵ 70.00
L293D Motor Driver Shield
GH₵40 GH₵40
Tax included.
Quantity:
10 in stock now
Available now in limited quantities.
Next Day Delivery
Lightning-fast delivery, guaranteed.
Free 90-day returns
Shop risk-free with easy returns.
About
Description
Motor Driver Shield is a board which gives possibility to control 4 DC motors or 2 step motors (unipolar or bipolar) and 2 servo motors additionaly by stacking on Arduino. There are 2 L293D motor driver IC on board which means it can drive 0.6A 4 seperate DC motors or 0.6A 2 seperate step motors. You can control speed and direction of motors independently. Motor controls are done by AF Motor Library.
Characteristics
- Info
5-12V operating voltage
- Info
Independent control of 4 DC motor
- Info
0,6A constant current on each channel